After competing in several national crappie tournaments, Tony Edgar realized he needed to make alterations to the front deck of his boat. The Missouri angler could catch plenty of crappies on lakes close to home by casting and vertical-jigging with a single rod; but when he started competing on southern lakes, he and his partner kept getting beat by teams using spider rigs.
âWith 8 rods and 16 baits out you have a better chance to catch fish,â Edgar says. So he got two metal racks from fellow tournament competitor Paul Alpers and made a couple of pole holders for the front deck of his 17-foot Bass Tracker. These days, his Ranger fiberglass boat is set up with all the essentials needed to spider-rig anywhere in the country.
Almost any type of fishing boat can be set up for spider-rigging crappies. âSome alterations are needed for the deep-V boats like the Lund and Lowe models,â says Ronnie Capps, a six-time crappie tournament national champion. Basically, spider-rigging allows a crappie angler to cover a swath of water at various depths with a variety of lures and livebaits. The following tips are from crappie pros, so you can set up your boat for this effective fish-catching tactic and still have the capability to convert the boat back to fishing for other species.
The most important element of the spider-rigging system is a good pole holder. Ronnie Capps built his first set with some cheap plastic rod holders and a wooden board that he mounted to the front deck of his boat. Today, he uses Driftmaster Gun Slinger holders he designed for spider-rigging.
The Gun Slinger holder has a V-shaped front that allows Capps to quickly set the hook to his right or left, and an extended cradle contoured to increase clearance when he needs to quickly grab a pole. âWhen you get bit spider-rigging, you need to set the hook at an angle sometimes, especially when fishing shallow water,â Capps says.
He matches up the holders with Driftmaster T-250 T-Bars (18 inches tall by 24 inches wide) that have easy-to-turn adjustments for moving the holders out of the way of the trolling motor. The trolling system also has unlimited rod adjustments and a polished stainless-steel base mount.
Driftmaster also offers Pro and Liâl Pro series of rod holders and a complete complement of bases, so that beginners can match rod holders to their specific boats and fishing requirements.
Edgar and his tournament partÂner, John Shannon, rig the front deck of their boats with custom-designed PerottiBilt holders made of stainless steel. âThey wonât rust and wonât break and their adjustments are second to none,â says Edgar, who favors these holders because he can adjust the spacing of his rods just by twisting a heavy-duty wing nut. âYou want your poles evenly dispersed off the front of the boat, with the tips about 2 to 3 feet apart.â
The PerottiBilt holders allow Edgar and Shannon to adjust and break down their spider rigs without using any tools. PerottiBilt offers a variety of complete systems including the tee bar, rod holders, clamps, and a choice of base and lock nuts for spider-rigging beginners.
A fully adjustable spider-rigging system is what Hall of Fame angler Wally Marshall also had in mind when he designed the Tempress Mr. Crappie Pro Series Rod Holder System. âI got tired of having to adjust my rod holders every time I went across the lake,â he says. âI had to carry a set of wrenches and tools, and if the rod holder got out of line, I had to adjust it again. This system works with a lever handle on each rod holder that adjusts up and down. It has a spline at the bottom where you can adjust it to 24 positions, so you can get the perfect spread on your crappie rods every time when spider-rigging.â
His rod holder system is constructed from marine-grade resin, which doesnât corrode or rust. The hard plastic holders also flex if the poles bend too much. âThat prevents you from breaking rods when you hang them up in brush,â Marshall says. âA lot of the metal rod holders donât have any give, and all of a sudden you snap a rod if youâre not paying attention.â
A quick release on the deck mount allows Marshall to disassemble his rod holders in seconds without having to use any tools. The system also has a tray in the top where you can store weights, spare hooks, or jigs, and a place with 22 holes for hanging crankbaits.
If you prefer not to permanently install a rod-holder to your boat, Cleat Clamp rod-holder bases mount to boat cleats without any drilling. Available 11.5- or 23.5-inch models, each Cleat Clamp accommodates either 2 or 4 rod holders, with 3/8- and 1/2-inch thread options available.
All of the rod holder systems mentioned can easily be removed to allow anglers to fish for bass and other species on their next fishing trip.
A double-seat arrangement works best when you want to spider-rig with a partner. If youâre buying a new boat, most manufacturers can design two pedestal seats on the front deck for this purpose. If, however, you already have a boat with one pedestal seat in front, you either have to install another in the flooring or try a Tempress Mr. Crappie Double Down seat stand.
The Double Down is sized to fit on the bow platform of any bass boat and slides over an11-inch seat pedestal. The marine-grade, stainless-steel frame stands 12 inches tall and can accommodate two swivel seats that can rotate 360 degrees.
Although some crappie anglers use a handheld trolling motor for spider-rigging, Capps believes a foot-control model is essential. âThereâs no room in my scheme for having a handheld trolling motor, because I need both hands free at all times,â he says. âA variable-speed motor can be adjusted to the wind speed or any other conditions you face.â
Edgar also favors a variable-speed model, such as the Minn Kota Maxxum Pro, because it allows him to adjust and keep the same speed even when his batteries are wearing down after a long day of spider-rigging.
Electronics also play a key role, so beginners should start with a good sonar and GPS unit. Capps recommends one that records depths in tenths of a foot, since even subtle changes can make the difference between having one or eight poles in the strike zone. âWe won a tournament in Florida once while fishing a contour that went from 13.3 to 13.6 feet,â he says. âIf we got off that little contour we couldnât get bit.â
The Tennessee pro uses a separate Lowrance GPS unit, mounting it on a cooler so he can place the GPS unit between his legs, where itâs positioned in a straight line of sight with his sonar and the tips of his rods. He prefers this setup over a handheld GPS because it keeps his hands free for grabbing the rods quickly, and his unit is within easy reach to mark a waypoint when he catches a fish.
Properââ positioning of all the equipment on the front deck is required to have an effective spider-rig system. Edgar and Shannon suggest positioning your seats first if possible and then installing the rod holders. âYou want the seats far enough away so that no part of your body is touching the holder, because when youâre touching the holder youâre hitting the rods.â
The rod holders should be placed as far to the front as possible, they add. Too far to the side, thereâs too much bounce to the boat.
Capps suggests a â2-foot ruleâ for positioning seats and pole holders on the front deck. âIf you have two seats in the front of the boat, you want the pole-holder base to be 2 feet from the base of the seat; and then you want each seat to be 2 feet from the other,â he says. He installs the bases of his two pole holders about 21â2 feet apart, to leave room for his sonar.
With a good set of pole holders and the right layout on the front deck, a beginner can spider-rig up a mess of crappies just like the pros and still have the versatility to fish for other species on the same trip.
Fundamental Rigging Tips
The ideal pole length for learning how to spider-rig, according to tournament veterans Ronnie Capps, Wally Marshall, and Tony Edgar, is 12 feet. âA 12-footer is easier to handle and easier for lifting fish into the boat,â according to Edgar. He recommends an Ozark Rod Company model constructed with 1M7 graphite. It has an extended foam handle, which he prefers over cork because it holds up better when constantly moving rods in the holders. Marshall recommends one of his Signature Series poles for weights under 2 ounces, and his Tight Line Specials poles for weights up to 6 ounces.
A BânâM two-piece Pro Staff Trolling Rod is another ideal pole. The rod is stiff enough to handle 2 jigs and a 5-ounce sinker trolled at 2 mph, yet sensitive enough to detect a light bite. A 12-foot pole is easy to handle and long enough to get lures out in front of the boat in shallow water.